Filofill P2654 is specially designed for cablejoints up to 1kV. Filofill P2654 had good anti corrosionproperties abd shows a good adhesion to metald, ceramics, and many different plastics, and can be utilized on all plastic- and paper isolated cabletypes.
| Properties | Unit | Value | Test Method |
| Potlife (process time) | |||
| 0.3 l at 5°C | minutes | 28 | IEC 60455-2 |
| 0.3 l at 40°C | minutes | 9 | IEC 60455-2 |
| Viscosity mixture 25°C | Mpa.s | 3000 - 6000 | |
| Gel-time | minutes | 14 | |
| Density | g / cm³ | 1,52 | EN ISO 1183-1 |
| Impact strength | kJ/m² | 36,4 (no break) | EN ISO 179 |
| Hardness | Shore D | 41 | EN ISO 868 |
| Tensile strength | MPa | 7.07 | EN ISO 527 |
| Elongation at break | % | 40 | EN ISO 527 |
| Water absorption (30d/23°C) | % | < 1,0 | |
| Curing in the presence of water - Gas volume | ml | 0 | IEC 60455-2 |
| Dielectric strength | kV / mm | > 20 | |
| Volume resistivity at room temperature | Ohm | 9x10¹⁴ | IEC 60093 |
| Volume shrinkage | % | 0,33 | |
| Temperature resistance | °C | -25 tot +120 | |
| Shelf life | months | 24 | |
| colour | black | ||
| Mixing time | minutes | 2 | |
| Dry heat resistance: 28 days at 120°C | IEC 60455-2 | ||
| Mass loss | % | 0.79 | HD 631.1 S2: 2007-12 |
| Impact strength | kJ/m² | 19.8 | EN ISO 179 |
| Wet heat resistance: 28 days at 70°C | IEC 60455-2 | ||
| Hardness | Shore D | 48.9 | EN ISO 868 |
| Tensile strength | MPa | 7.02 | EN ISO 527 |
| Elongation at break | % | 36 | EN ISO 527 |
| Dielectric strength | kV/mm | 19.74 | EN 60243-1 |
| Más información | |
|---|---|
| Home page product list | No |